|
Post by sodapopper on Jul 5, 2016 22:50:36 GMT
I want to use Melody for a bay window treatment. The rod is continuous with no return. The middle section is 64" wide and the 2 side windows are 27" wide. The ways I thought to do this are:
1. 2 flat panels on the center window with gathered section in the middle and gathered section on the end windows OR 2. lengthen the flat panel to fit the end windows, with 1 panel in the middle of the large window and gathers between them
I always have trouble with bay windows, which way do you suggest, or is there even a better way?
thanks in advance
|
|
|
Post by M'Fay Patterns Support Staff on Jul 6, 2016 14:07:16 GMT
We feel your bay measurements are not appropriate for the melody design. Your side windows are too small to balance gathered sections at each side of a flat section. Also, the Melody instructions are for a board mount, not a rod. The Bordeaux Valance would be nice, but it also goes on a board, not a rod. If you want to mount the valance on a rod, consider one of the Mix and Match valances (9235 and 9236).
|
|