|
Post by Ann Mautz on Oct 10, 2013 13:17:05 GMT
I'm working on an empire on the pole swag and I'm not understanding how work the return. I'm using a 2" pole and from what the pattern says the return would go right around the end of the pole and the finial would have to screw through the fabric into the pole. I'm also assuming that using a decorative bracket, it cannot be hidden and would have to placed between a swag section. Any help would be appreciated as I must install this tomorrow. Thanks, Ann
|
|
|
Post by M'Fay Patterns Support Staff on Oct 10, 2013 14:54:34 GMT
Hi Ann, If you have a bracket that extends out onto the front of the pole, the return can't wrap around it. In that case, you would have to cut the return area straight down, enough to clear the pole, and then straight back to the wall. Leave a seam allowance that you can either sew or tuck in and glue to finish off the raw edge. The return can then fit under the pole and beside the bracket.
|
|