|
Post by swanport on Feb 19, 2016 3:11:21 GMT
I am trying to lengthen the Jabot on the Baroque Valance. I have lengthened the other pieces 13" by following the instruction guide. I cut the Jabot piece where it looked cut in the guide in a line perpendicular to the straight return line. After spreading 13", the newly drawn cutting line on the side that attaches to the lengthened End piece is way too short. The instructions mention changing this piece's added length from the other pieces. The accompanying picture shows a much smaller lengthening amount compared to the other pieces shown. I am confused and would like some help altering this piece of the pattern. Thank you for your time.
|
|
|
Post by M'Fay Patterns Support Staff on Feb 19, 2016 15:16:31 GMT
Cut the pattern straight across, keeping the return edge straight, as shown in the sketch. Spread it apart the necessary amount (measure it) so that the seam line will fit the end section pattern you altered.
|
|